G-LDCDW – White Locking Dial Set, Catwalk® Glass-Fitting Cat Door
White · inside & outside · G-LDCDW
A complete 4-way locking dial set in white for the Catwalk® Glass-Fitting Cat Door: inside and outside sections that join through the frame with a fixing screw, hidden under a cover cap. Take the door out, swap the dial with a screwdriver, and refit.
Retail checkout opens soon · glaziers, installers and retailers: trade pricing via the trade button.
Specifications
G-LDCDW- Fit
- Fits
- G-CDW
- Details
- Colour
- White
- In the set
- inside dial section, outside dial section, fixing screws, cover caps
- Fitting
- Fixing screw — door removed first
- Barcode GTIN-13
- 9421006250175
Lock it properly again
The locking dial is the part you turn every night. If yours is cracked, spinning, stiff or missing, a new set restores all four settings: entry only, exit only, both ways and locked.
Fits these doors
Catwalk® Glass-Fitting Cat Door (Standard) — G-CDW
Which colour?
Each door colour takes a particular dial — the list above is exact, so match your door code rather than guessing by eye. Unsure? Email a photo to info@petnest.co.nz.
What arrives
- Inside dial section
- Outside dial section
- Fixing screws
- Cover caps
The flap is not included; replacement flaps are listed on the spares page.
Care
Wipe with a damp cloth. No solvents or abrasive pads.
Warranty
Covered against manufacturing defects. Keep your proof of purchase. This sits alongside, and does not limit, your rights under the Consumer Guarantees Act 1993.
How to fit it
- 1Remove the cover cap. Pry or lift it off to reach the fixing screw.
- 2Undo the fixing screw. It holds the inside and outside sections of the dial together.
- 3Separate the old dial. Pull the two sections apart from either side. If it is damaged, wiggle gently rather than forcing it against the frame.
- 4Fit the new dial. Line up the inside and outside sections through the frame and tighten the fixing screw.
- 5Cap it and check. Press the cover cap over the screw. The dial should click firmly into all four positions — if it spins, tighten the screw a little more.
- 6Refit the door. Screw it back so it is held firmly, but do not overtighten — in glass that can start a run in the pane.
What owners say
No reviews yet for this part. Reviews here come only from people who bought it on PetNest.
Bought this from PetNest? Use the review link in your order email, or sign in to leave a review.
Before you buy
Which doors does the G-LDCDW fit?
Glass-Fitting Cat Door (Standard) (G-CDW). Each door colour takes a specific dial colour — this list is exact.
What is in the set?
Inside dial section, outside dial section, fixing screws, cover caps.
Do I need tools?
A screwdriver. Take the door out first, then the dial comes apart at its fixing screw.
Does the door have to come out?
It is strongly recommended, especially in glass. Remove the four screw caps and screws, separate the inner and outer frames, change the dial on the bench, then refit.
What do the four settings do?
Entry only, exit only, both ways, or locked both ways. A correctly fitted dial clicks firmly into each one.
