W-LDCDG – Grey Locking Dial Set, Catwalk® Wood-Fitting Cat Door
Grey · inside & outside · W-LDCDG
A complete 4-way locking dial set in grey for the Catwalk® Wood-Fitting Cat Door: a pronged section and a flat section that press together through the frame. Take the door out, tap the old dial out with a punch, press the new one in, and refit.
Retail checkout opens soon · glaziers, installers and retailers: trade pricing via the trade button.
Specifications
W-LDCDG- Fit
- Details
- Colour
- Grey
- In the set
- inside dial section, outside dial section
- Fitting
- Press-fit — door removed first
- Barcode GTIN-13
- 9421006250151
Lock it properly again
The locking dial is the part you turn every night. If yours is cracked, spinning, stiff or missing, a new set restores all four settings: entry only, exit only, both ways and locked.
Fits these doors
Catwalk® Wood-Fitting Cat Door, Slim Line — W-CDW, W-CDB
Catwalk® Wood-Fitting Cat Door, Tunnel — W-CDTW, W-CDTB
Which colour?
Each door colour takes a particular dial — the list above is exact, so match your door code rather than guessing by eye. Unsure? Email a photo to info@petnest.co.nz.
What arrives
- Inside dial section
- Outside dial section
The flap is not included; replacement flaps are listed on the spares page.
Care
Wipe with a damp cloth. No solvents or abrasive pads.
Warranty
Covered against manufacturing defects. Keep your proof of purchase. This sits alongside, and does not limit, your rights under the Consumer Guarantees Act 1993.
How to fit it
- 1Support the door. Lay it on a firm, flat surface and protect the area around the dial with tape or a soft cloth.
- 2Tap out the old dial. Find the pronged side and tap the prong back out the way it went in, using a punch and light, controlled taps. A drop of lubricant helps if it is tight; do not prise against the door. If the prong is broken or sits flush, drill a small centred hole and draw it out with a screw or extractor.
- 3Clean the hole. Make sure the frame hole is clean and free of debris.
- 4Press in the new dial. Push the pronged part through from one side, line up the flat part on the other, and press them together until the prong engages — by hand, or with a soft mallet and the surface protected. If needed, a tiny drop of silicone oil helps; wipe off any excess or the dial can stay loose.
- 5Check it. It should sit flush, click firmly into all four positions and not loosen as you turn it.
- 6Refit the door. Screw it back firmly but do not overtighten — it can strip the threads.
What owners say
No reviews yet for this part. Reviews here come only from people who bought it on PetNest.
Bought this from PetNest? Use the review link in your order email, or sign in to leave a review.
Before you buy
Which doors does the W-LDCDG fit?
Wood-Fitting Cat Door, Slim Line (W-CDW, W-CDB); Wood-Fitting Cat Door, Tunnel (W-CDTW, W-CDTB). Each door colour takes a specific dial colour — this list is exact.
What is in the set?
Inside dial section, outside dial section.
Do I need tools?
A punch and a soft mallet. Take the door out first; the old dial taps out and the new one presses in.
Does the door have to come out?
It is strongly recommended. Remove the four screw caps and screws, separate the inner and outer frames, change the dial on the bench, then refit.
What do the four settings do?
Entry only, exit only, both ways, or locked both ways. A correctly fitted dial clicks firmly into each one.
